Cat® NSP10-16N3(R)(I)(S) pedestrian stackers

Overview

Overview

The NSP10-16N3 family is the latest generation of Cat® pedestrian stackers, designed for short shuttle runs and stacking up to 5.4 metres. Its 16 models cover 1.0, 1.2, 1.4 and 1.6 tonne capacities: the 800 mm wide, 1835 mm long NSP10N3 fits into the tightest warehouses, while the larger models are reliable everyday workhorses for any warehouse.

R models have a fold-down operator platform that takes the legwork out of longer distances, and the platform stays down once lowered, so the operator does not have to fold it again each time they step back on. Initial lift (I) models raise the mast and forks by 110 mm for extra ground clearance on ramps and can carry two pallets at once. The NSP16N3S and NSP16N3SR straddle models have support legs that can be adjusted on site between 900 and 1300 mm, and forged forks that pick wider and bottom-boarded pallets straight off the floor.

Key features

• AC drive with an advanced programmable controller, so users can prioritise faster performance or smoother handling with lower energy consumption.
• Patented emPower tiller head with large lift and lower buttons that are easy to use one-handed, even with gloves; tiller-up drive at creep speed for manoeuvring in tight spaces.
• Offset tiller arm on the non-R models, so the operator can walk comfortably and safely alongside the truck.
• Slim mast profiles and carefully routed hydraulic hoses for a clear forward view; high-strength masts and a height-adjustable castor wheel for stable load handling.
• Speed-controlled lift motor and proportional lowering valve as standard on every model.
• Closed chassis, waterproof electrics and a steel-covered battery compartment; the integrated drive and lift system has fewer components and the main parts are quick to reach.
• Standard-size 24 V battery from 150 to 375 Ah; multifunction display with hour meter and battery discharge indicator as standard.

Options

• Li-ion battery, 30 A integrated charger for lead-acid batteries, side battery change (250 Ah) and battery change trolley
• Hydraulic side stabilisers for the NSP16N3 and NSP16N3R, for higher residual capacity
• Centre-mounted Z-shaped tiller (not available on R models)
• Cold store version for 0 to –35 °C
• PIN code log-in, high-grip drive wheel, tandem load wheels, speed reduction with raised forks
• 1300 mm load backrest, accessory compartment, A4 list holder, 10–16" computer stand, special RAL paint